Scheduler questions ...

[theskyhound]

... note that even though I've set the exposure count and time in the "Edit Observation" dialog as 51x1, in the Imaging project dialog it's seeing this as 1 acceptable image with a total SNR of 0, completion 0% with a total time spent of 51min ... in the Observations section of the Imaging Project it reflects that as well, 51x1 exposures but no images ... is the program expecting some additional info?

I progress to the next day in the series, the 30th, but the schedule here doesn't recognize the exposures that I did on the 29th ... what should I do to cause it to recognize the previous observation period on the 29th and continue the series?

Also, let's assume that we figure out the progression and each day I do an additional 51x1 lights for another 17% ... that means that when we reach 100% we will have completed a total of 300min of exposures, or 5hr ... but that's much shorter than the Imaging Project dialog which tells me I have 22.1hr of exposures to do ... what could cause this?

Soldiering onward! 

I would need to see a screen capture of the Observation tab of the Imaging Project to be able to better comment, but I suspect that root issue remains the same: this target object is very difficult using the Clear filter under your observing conditions. It doesn't think you recorded any SNR at all in the previous image stack. Did you? Or is this all pretend? 

Without a screen capture I am having trouble following the rest, but regarding the second part, SNR does not stack linearly. You are not going to add 17% each night.  You are going to add less and less SNR each night.